Aurona FX Strobe IP65 · Operating Manual · 19 pages
Model Aurona FX Strobe IP65Edition EN · 04 / 2026 · V1Dokument-Nr. AUBLFX-EN-01
IP65 LED Blinder with RGB Pixel Plate

Aurona FX Strobe

Weatherproof effect blinder with 432 × 1.5 W RGB LEDs in 48 pixel cells and 84 × 5 W warm-white LEDs in 12 beam cells, electronic frost, 35 RGB and 16 white auto programs and nine DMX channel modes up to 159 channels

Operating manual. Please read in full before first use and keep for future reference.

Light source
432+84RGB + WW
Cells
48 + 12RGB + white
DMX channels
1–1599 channel modes
IP rating
IP65Outdoor
Aurona FX Strobe IP65Foreword · About this document

Foreword

00Welcome

Thank you for choosing the Aurona Aurona FX Strobe IP65 — a weatherproof effect blinder combining two systems in one housing: an RGB pixel plate of 432 LEDs in 48 individually controllable cells and a warm-white beam zone of 84 LEDs in 12 cells.

This document covers installation, operation, menu navigation and the complete DMX mapping of all nine channel modes. Read the manual in full — especially the Safety Information chapter — before first use, and keep it with the unit.

0.1Intended Use

The fixture is weatherproof (IP65) and intended for professional use only. Maximum ambient temperature: 40 °C. The housing may be hot during and after operation.

0.2Scope of Delivery

Aurona FX Strobe IP65Contents · Overview

Table of Contents

—Overview

  1. 01Safety Instructions04
  2. 02Technical Specifications05
  3. 03Installation & Fuse Replacement06
  4. 04Menu — Overview07
  5. 4.1Static Colours & Manual Operation08
  6. 4.2Auto Programs & Sound09
  7. 4.3Wireless DMX (WDMX) & Firmware Update10
  8. 05Cell Layout11
  9. 06DMX Channel Charts (9 channel modes, complete)12
  10. 6.11, 3, 4 and 5-Channel Modes12
  11. 6.214-Channel Mode13
  12. 6.316-Channel Mode15
  13. 6.451-Channel Mode16
  14. 6.5147 and 159-Channel Mode17
  15. 07Cleaning & Maintenance18
  16. —CE Compliance Notice19
Aurona FX Strobe IP6501 · Safety Instructions

Chapter 01

01Safety Instructions

Warning — Risk of Electric ShockDo not open this device, there are no user-serviceable parts inside. Do not look at the light source when the device is on. ONLY connect this device to a grounded and protected circuit, and never to a dimmer or rheostat.

1.1Power Input & Power Linking

This device has an auto-switching power supply for 100–240 V AC, 50/60 Hz, with True1 input and output. When power-linking fixtures, do not exceed the permissible total current of the circuit.

Aurona FX Strobe IP6502 · Technical Specifications

Chapter 02

02Technical Specifications

Light Source & Photometrics

RGB plate432 × 1,5 W RGB-LED — upper zone 9 LEDs × 24 segments, bottom zone 9 LEDs × 24 segments
White beam84 × 5 W warm-white LED — 7 LEDs × 12 segments
Colour temperature (warm white)3250 K
Beam angleRGB 120° · warm white 60°
OutputFull on RGB + CW: 8800 lx @ 1 m · 2205 lx @ 2 m
PWM4000 Hz
LED life50.000 h

Effects

Dimming5 × 16-bit digital dimming curves
Strobe1 – 25 Hz
Electronic frostTransparency level 0 % – 100 %
Pixel controlRGB plate 48 cells + white beam 12 cells
Auto programs35 RGB and 16 white programs, each also as random run

Control

Operational modesStatic, colour fade, auto program, sound active, master/slave, DMX, RDM, WDMX
Display4-button LCD display control panel
DMX protocolDMX512
DMX channel modes1 / 3 / 4 / 5 / 14 / 16 / 51 / 147 / 159 CH + freely assignable user mode
DMX interface5-pin XLR
Software upgradevia DMX

Housing, Electrical & Rigging

Input voltage100 – 240 V AC, 50/60 Hz
Power consumption400 W
Power connectionTrue1 power input and output (rear)
HousingAluminium, matte black
Cooling2 fans
Dimensions372 × 186 × 146,2 mm
Net weight8,1 kg
RiggingDouble yokes · mounting point top and bottom · cam locks for ¼-turn omega bracket · 6 coffin locks + 3 tool-free lock handles
Aurona FX Strobe IP6503 · Installation & Fuse Replacement

Chapter 03

03Installation & Fuse Replacement

3.1Product Installation

This device can be mounted in many orientations provided each individual device is secured by the correct mounting bracket. The double yokes allow both free-standing floor use and horizontal hanging; mounting points on the top and bottom are provided for vertical rigging. Cam locks accept ¼-turn omega brackets; for linking multiple fixtures, 6 coffin locks and 3 tool-free lock handles are provided.

Safety CableThe mounting point must safely bear the weight of the fixture; the fixture must additionally be secured with a suitable safety cable of sufficient load rating in accordance with local regulations and laws.

3.2Fuse Replacement

If the fine-wire fuse fuses, only replace it by a fuse of the same type and rating. Before replacing the fuse, unplug the mains lead.

  1. Unscrew the fuse holder on the rear panel with a fitting screwdriver (anticlockwise).
  2. Remove the old fuse from the fuse holder.
  3. Install the new fuse in the fuse holder.
  4. Replace the fuse holder in the housing and fix it.
Aurona FX Strobe IP6504 · Menu — Overview

Chapter 04

04Menu — Overview

DisplayOptions / valuesFunction
DMX Add<001> – <512>Set DMX address
DMX ChaChannel mode 1 / 3 / 4 / 5 / 14 / 16 / 51 / 147 / 159 · <User>Select DMX channel mode
Dim Mode<01> <02> <03> <04> <05>Select dimmer curve
DMXLoss<Hold> <Blacko> <Manual> <Auto>Select mode when DMX is lost
UserDMXCH:<01> … EndEdit a user DMX mode
StaticC<R> <G> <B> <W> <GB> <RB> <RG> <RGB> <RW> <GW> <BW> <RGW> <RBW> <GBW> <RGBW>Select static colour — see chapter 4.1
Dim <000> – <255>Intensity of each static colour
ManualCR / G / B <000> – <255> · Dim <000> – <255> · S<000> – S<100>Set intensity of each colour separately and the strobe rate
Manual WWT<001> – <011> · <Dim000> – <Dim255>Set the colour temperature WCT 01–11 and adjust brightness
Auto PrAuto RGB <Off> · Random (Pr02–Pr35) · Pr02 – Pr35Auto program for the RGB plate
Auto RGB Sp<000> – <100> · Dim<000> – <255> · Fr<000> – <100>Speed, dimmer and frost for the RGB plate
Auto White <Off> · Random (Pr02–Pr16) · Pr02 – Pr16Auto program for the white beam
Auto White Sp<000> – <100> · Dim<000> – <255>Speed and dimmer for the white beam
SoundSen<000> – <100>Sound active mode and sensitivity level
Mas/Sla<M> / <S>Select master/slave mode
FrostFrost<000> – <100>Transparency level of the electronic frost
Wireless<ON> / <OFF>Turn wireless DMX on or off
<EL Mode> → CH<00>–<05>Select EL mode and group number
<W-DMX_R> → <Receive> / <Delete>Set the fixture to receive wireless DMX
<W-DMX_T> → <Transim> / <Create>Set the fixture to transmit wireless DMX
Fan Set<off> <Auto> <Low> <Med> <Hig>Turn the fan off or on, select speed
TempTemp <xxx °C>Current temperature of the driver PCB
Update<N> / <Y> · <START>Update firmware or update another fixture
Reset<N> <Y>Recover factory default
Aurona FX Strobe IP6504.1 · Static Colours & Manual Operation

4.1Static Colours (StaticC)

In StaticC mode, use "Up" and "Down" to select the desired solid colour and press "Enter" to save. The codes are composed of the colours R red, G green, B blue and W white. The intensity is then set via Dim from 000 to 255.

ValueColour combination
RRed
GGreen
BBlue
WWhite
GBGreen + Blue
RBRed + Blue
RGRed + Green
RGBRed + Green + Blue
ValueColour combination
RWRed + White
GWGreen + White
BWBlue + White
RGWRed + Green + White
RBWRed + Blue + White
GBWGreen + Blue + White
RGBWRed + Green + Blue + White

4.1.1Manual Colour Mode (ManualC)

In Manual C mode, use "Up" and "Down" to set the intensity of each colour (R, G, B, W) from 000 to 255 and select the strobe speed from S000 to S100 (S000 is strobe off). Press "Enter" to save.

4.1.2Colour Temperature (Manual WCT)

Select the colour temperature from <WT01> to <WT11>, then use "Up" or "Down" to select the intensity between 1 and 100 and press "Enter" to confirm.

Aurona FX Strobe IP6504.2 · Auto Programs & Sound

4.2Auto Programs

The fixture runs auto programs separately for its two zones: the RGB pixel plate and the warm-white beam zone. In Auto Pro mode, first use "Up" and "Down" to select Auto Pro <RGB> or Auto Pro <White>.

RGB Plate

After selecting Auto Pro <RGB>, confirm with "Enter" and use "Up"/"Down" to select the program — from Random (Pr02 to Pr35 run in random order, 10 to 180 seconds per effect) up to Pr35. Then set the speed from <Sp000> to <Sp100>, the dimmer from <dim000> to <dim255> and the frost transparency from Fr<000> to Fr<100>. Press "Enter" to save.

White Beam

After selecting Auto Pro <White>, confirm with "Enter" and use "Up"/"Down" to select the program — from Random (Pr02 to Pr16 in random order, 10 to 180 seconds per effect) up to Pr16. Then set the speed from <Sp000> to <Sp100> and the dimmer from <dim000> to <dim255>, and press "Enter" to save.

Programs via DMXIn the 14-channel mode the same programs are available on channels 9 to 14: channel 9 selects the RGB program, channel 10 its speed, channel 11 its dimmer; channel 12 selects the white program, channel 13 its speed, channel 14 its dimmer.

4.2.1Sound Active Mode

In Sound mode use "Up" and "Down" to select the sensitivity from Sen000 to Sen100 and press "Enter" to save.

4.2.2Master / Slave, DMX Loss & User DMX

Set the master fixture to one of the stand-alone operating modes — automatic, sound, static colour or manual colour; on the slaves, set Mas/Sla to "S". Via DMX Loss, the behaviour on signal loss can be set to Hold, Blackout, Manual or Auto. Under User DMX you can assign a function per channel; set the channel following the last used one to End. To select this mode, choose User under DMX channel mode.

Aurona FX Strobe IP6504.3 · Wireless DMX (WDMX) & Firmware Update

4.3Wireless DMX (WDMX)

Each fixture is equipped with a built-in WDMX module and an antenna, allowing it to both receive and transmit DMX signals without any DMX cables. To enable WDMX operation, first pair the fixture with another fixture or with a standalone transceiver connected to a DMX console.

Turn on a standalone transceiver (not included) by pressing the power button. When the indicator light turns white, release the button; the transceiver is then in configuration mode. There, pressing the button once switches the air protocol. After selecting the target protocol, press and hold the button for more than one second and release it when the indicator turns white.

ColourAir protocol
RedEL MODE
GreenWDMX reception
BlueWDMX transmission
GroupIndicator colour
CH00Red
CH01Green
CH02Blue
CH03Red + green = yellow
CH04Green + blue = cyan
CH05Red + blue = magenta

In EL MODE, six groups with independent ID codes can be set; only transceivers within the same group communicate with one another. On the fixture: press "Menu", select Wireless, press "Enter" and enable wireless with "On"/"Off". With "On", select EL Mode under Mode and set the group number CH<00> to CH<05>. When several fixtures are in the same group, the one transmitting is the transmitter and the rest automatically become receivers. W-DMX_R → "Delete" starts pairing with a transmitter; W-DMX_T → "Create" starts pairing with a receiver.

4.3.1Firmware Update

  1. Set fixture A to Update mode, select "Y" then select "START".
  2. Link fixture A and fixture B with a DMX cable, then power up fixture B.
  3. Press "Enter" on fixture A; the firmware of fixture A will be copied to fixture B.
Same Fixture Type OnlyEnsure that fixtures A and B are of the same type, otherwise damage may occur. Only fixtures A and B should be in the DMX chain when updating firmware.
Aurona FX Strobe IP6505 · Cell Layout

Chapter 05

05Cell Layout

The light-emitting surface consists of five rows: four rows of RGB cells (12 cells each) and, between them, one row of 12 warm-white beam cells. In total there are 48 RGB cells (RGB1 – RGB48) and 12 white cells (W1 – W12).

RGB1RGB2RGB3RGB4RGB5RGB6RGB7RGB8RGB9RGB10RGB11RGB12
RGB13RGB14RGB15RGB16RGB17RGB18RGB19RGB20RGB21RGB22RGB23RGB24
W1W2W3W4W5W6W7W8W9W10W11W12
RGB25RGB26RGB27RGB28RGB29RGB30RGB31RGB32RGB33RGB34RGB35RGB36
RGB37RGB38RGB39RGB40RGB41RGB42RGB43RGB44RGB45RGB46RGB47RGB48

Depending on the channel mode, the cells are grouped differently:

ModeGrouping
16 CHRGB in 4 rows (RGB1–12, 13–24, 25–36, 37–48) · white as one group (W1–W12)
51 CHRGB in 12 columns (each RGB n, n+12, n+24, n+36) · white per cell W1 – W12
147 CHRGB per individual cell (RGB1 – RGB48) · white not separately addressable
159 CHRGB per individual cell (RGB1 – RGB48) · white per individual cell (W1 – W12)

The signed EU Declaration of Conformity for this product is available upon request from F. & M. Vertrieb GmbH, Waldweg 26, 54636 Sefferweich, Germany.

Aurona FX Strobe IP6506.1 · 1, 3, 4 and 5-Channel Modes

Chapter 06

06DMX Channel Charts

The fixture offers nine channel modes (1 / 3 / 4 / 5 / 14 / 16 / 51 / 147 / 159 CH) plus a freely assignable user mode.

6.11-Channel Mode

ChannelValueFunction
1000–255Master dimmer (select colour temperature from the menu)

6.1.13-Channel Mode

ChannelValueFunction
1000–255Warm white to cool white
2000–255Dimmer 0 % – 100 %
3000–255Electronic frost 0 % – 100 %

6.1.24-Channel Mode

ChannelValueFunction
1000–255Red 0 % – 100 % for all cells
2000–255Green 0 % – 100 % for all cells
3000–255Blue 0 % – 100 % for all cells
4000–255Electronic frost 0 % – 100 %

6.1.35-Channel Mode

ChannelValueFunction
1000–255Red 0 % – 100 % for all cells
2000–255Green 0 % – 100 % for all cells
3000–255Blue 0 % – 100 % for all cells
4000–255White 0 % – 100 % for all cells
5000–255Electronic frost 0 % – 100 %
Aurona FX Strobe IP6506.2 · 14-Channel Mode (1/2)

6.214-Channel Mode — channel 1–9

ChannelValueFunction
1000–255Red 0 % – 100 % for all cells
2000–255Green 0 % – 100 % for all cells
3000–255Blue 0 % – 100 % for all cells
4000–255White 0 % – 100 % for all cells
5000–255Dimmer 0 % – 100 %
6000–015No function (shutter on)
016–119Strobe slow → fast (1–25 Hz)
120–127No function (shutter on)
128–183Strobe random, slow → fast
184–191No function (shutter on)
192–247Strobe audio sensitivity low → high
248–255No function (shutter on)
7000–009Use dimmer curve from setting of control board
010–057Dimmer 1
058–106Dimmer 2
107–155Dimmer 3
156–204Dimmer 4
205–255Dimmer 5
8000–255Electronic frost 0 % – 100 %
9000–009Off
010–015Random (Pr02 – Pr35)
016–022Auto Pro RGB — Pr02
023–029Auto Pro RGB — Pr03
030–036Auto Pro RGB — Pr04
037–043Auto Pro RGB — Pr05
044–050Auto Pro RGB — Pr06
051–057Auto Pro RGB — Pr07
058–064Auto Pro RGB — Pr08
065–071Auto Pro RGB — Pr09
072–078Auto Pro RGB — Pr10
079–085Auto Pro RGB — Pr11
086–092Auto Pro RGB — Pr12
093–099Auto Pro RGB — Pr13
100–106Auto Pro RGB — Pr14
107–113Auto Pro RGB — Pr15
114–120Auto Pro RGB — Pr16
121–127Auto Pro RGB — Pr17
128–134Auto Pro RGB — Pr18
135–141Auto Pro RGB — Pr19
142–148Auto Pro RGB — Pr20
149–155Auto Pro RGB — Pr21
156–162Auto Pro RGB — Pr22
163–169Auto Pro RGB — Pr23
170–176Auto Pro RGB — Pr24
177–183Auto Pro RGB — Pr25
184–190Auto Pro RGB — Pr26
191–197Auto Pro RGB — Pr27
198–204Auto Pro RGB — Pr28
205–211Auto Pro RGB — Pr29
212–218Auto Pro RGB — Pr30
219–225Auto Pro RGB — Pr31
226–232Auto Pro RGB — Pr32
233–239Auto Pro RGB — Pr33
240–246Auto Pro RGB — Pr34
247–255Auto Pro RGB — Pr35
Aurona FX Strobe IP6506.2 · 14-Channel Mode (2/2)

6.214-Channel Mode — channel 10–14

ChannelValueFunction
10000–255Auto Pro RGB speed 0 – 100
11000–255Auto Pro RGB dimmer 0 – 100
12000–009Off
010–023Random (Pr02 – Pr16)
024–038Auto Pro White — Pr02
039–053Auto Pro White — Pr03
054–068Auto Pro White — Pr04
069–083Auto Pro White — Pr05
084–098Auto Pro White — Pr06
099–113Auto Pro White — Pr07
114–128Auto Pro White — Pr08
129–143Auto Pro White — Pr09
144–158Auto Pro White — Pr10
159–173Auto Pro White — Pr11
174–188Auto Pro White — Pr12
189–203Auto Pro White — Pr13
204–218Auto Pro White — Pr14
219–233Auto Pro White — Pr15
234–255Auto Pro White — Pr16
13000–255Auto Pro White speed 0 – 100
14000–255Auto Pro White dimmer 0 – 100

Note: the manufacturer specifications list this mode as a 15-channel mode, while the channel chart lists 14 channels. The channels actually listed are printed here.

Aurona FX Strobe IP6506.3 · 16-Channel Mode

6.316-Channel Mode — RGB in four rows

ChannelValueFunction
1000–255Red 0 % – 100 % · RGB1 – RGB12
2000–255Green 0 % – 100 % · RGB1 – RGB12
3000–255Blue 0 % – 100 % · RGB1 – RGB12
4000–255Red 0 % – 100 % · RGB13 – RGB24
5000–255Green 0 % – 100 % · RGB13 – RGB24
6000–255Blue 0 % – 100 % · RGB13 – RGB24
7000–255Red 0 % – 100 % · RGB25 – RGB36
8000–255Green 0 % – 100 % · RGB25 – RGB36
9000–255Blue 0 % – 100 % · RGB25 – RGB36
10000–255Red 0 % – 100 % · RGB37 – RGB48
11000–255Green 0 % – 100 % · RGB37 – RGB48
12000–255Blue 0 % – 100 % · RGB37 – RGB48
13000–255White 0 % – 100 % · W1 – W12 (white zone)
14000–255Dimmer 0 % – 100 %
15000–015No function (shutter on)
016–119Strobe slow → fast (1–25 Hz)
120–127No function (shutter on)
128–183Strobe random, slow → fast
184–191No function (shutter on)
192–247Strobe audio sensitivity low → high
248–255No function (shutter on)
16000–255Electronic frost 0 % – 100 %
Aurona FX Strobe IP6506.4 · 51-Channel Mode

6.451-Channel Mode — 12 RGB columns + 12 white cells

ChannelValueFunction
1000–255Red 0 % – 100 % · RGB1, 13, 25, 37
2000–255Green 0 % – 100 % · RGB1, 13, 25, 37
3000–255Blue 0 % – 100 % · RGB1, 13, 25, 37
4000–255White 0 % – 100 % · cell W1
5000–255Red 0 % – 100 % · RGB2, 14, 26, 38
6000–255Green 0 % – 100 % · RGB2, 14, 26, 38
7000–255Blue 0 % – 100 % · RGB2, 14, 26, 38
8000–255White 0 % – 100 % · cell W2
9000–255Red 0 % – 100 % · RGB3, 15, 27, 39
10000–255Green 0 % – 100 % · RGB3, 15, 27, 39
11000–255Blue 0 % – 100 % · RGB3, 15, 27, 39
12000–255White 0 % – 100 % · cell W3
13000–255Red 0 % – 100 % · RGB4, 16, 28, 40
14000–255Green 0 % – 100 % · RGB4, 16, 28, 40
15000–255Blue 0 % – 100 % · RGB4, 16, 28, 40
16000–255White 0 % – 100 % · cell W4
17000–255Red 0 % – 100 % · RGB5, 17, 29, 41
18000–255Green 0 % – 100 % · RGB5, 17, 29, 41
19000–255Blue 0 % – 100 % · RGB5, 17, 29, 41
20000–255White 0 % – 100 % · cell W5
21000–255Red 0 % – 100 % · RGB6, 18, 30, 42
22000–255Green 0 % – 100 % · RGB6, 18, 30, 42
23000–255Blue 0 % – 100 % · RGB6, 18, 30, 42
24000–255White 0 % – 100 % · cell W6
25000–255Red 0 % – 100 % · RGB7, 19, 31, 43
26000–255Green 0 % – 100 % · RGB7, 19, 31, 43
27000–255Blue 0 % – 100 % · RGB7, 19, 31, 43
28000–255White 0 % – 100 % · cell W7
29000–255Red 0 % – 100 % · RGB8, 20, 32, 44
30000–255Green 0 % – 100 % · RGB8, 20, 32, 44
31000–255Blue 0 % – 100 % · RGB8, 20, 32, 44
32000–255White 0 % – 100 % · cell W8
33000–255Red 0 % – 100 % · RGB9, 21, 33, 45
34000–255Green 0 % – 100 % · RGB9, 21, 33, 45
35000–255Blue 0 % – 100 % · RGB9, 21, 33, 45
36000–255White 0 % – 100 % · cell W9
37000–255Red 0 % – 100 % · RGB10, 22, 34, 46
38000–255Green 0 % – 100 % · RGB10, 22, 34, 46
39000–255Blue 0 % – 100 % · RGB10, 22, 34, 46
40000–255White 0 % – 100 % · cell W10
41000–255Red 0 % – 100 % · RGB11, 23, 35, 47
42000–255Green 0 % – 100 % · RGB11, 23, 35, 47
43000–255Blue 0 % – 100 % · RGB11, 23, 35, 47
44000–255White 0 % – 100 % · cell W11
45000–255Red 0 % – 100 % · RGB12, 24, 36, 48
46000–255Green 0 % – 100 % · RGB12, 24, 36, 48
47000–255Blue 0 % – 100 % · RGB12, 24, 36, 48
48000–255White 0 % – 100 % · cell W12
49000–255Dimmer 0 % – 100 %
50000–015No function (shutter on)
016–119Strobe slow → fast (1–25 Hz)
120–127No function (shutter on)
128–183Strobe random, slow → fast
184–191No function (shutter on)
192–247Strobe audio sensitivity low → high
248–255No function (shutter on)
51000–255Electronic frost 0 % – 100 %
Aurona FX Strobe IP6506.5 · 147 and 159-Channel Mode

6.5147-Channel Mode

In this mode each of the 48 RGB cells is addressed individually. The channels follow the pattern red, green, blue per cell in sequence.

ChannelValueFunction
1 – 3000–255Red / Green / Blue 0 % – 100 % · cell RGB1
4 – 6000–255Red / Green / Blue · cell RGB2
……three channels per cell in the order red, green, blue
142 – 144000–255Red / Green / Blue · cell RGB48
145000–255Dimmer 0 % – 100 %
146000–015No function (shutter on)
016–119Strobe slow → fast (1–25 Hz)
120–127No function (shutter on)
128–183Strobe random, slow → fast
184–191No function (shutter on)
192–247Strobe audio sensitivity low → high
248–255No function (shutter on)
147000–255Electronic frost 0 % – 100 %

6.5.1159-Channel Mode

As the 147-channel mode, with the twelve white cells additionally addressable individually.

ChannelValueFunction
1 – 144000–255Same as the 147-channel mode (RGB1 – RGB48)
145 – 156000–255White 0 % – 100 % · cells W1 – W12 (one channel per cell)
157000–255Dimmer 0 % – 100 %
158000–015No function (shutter on)
016–119Strobe slow → fast (1–25 Hz)
120–127No function (shutter on)
128–183Strobe random, slow → fast
184–191No function (shutter on)
192–247Strobe audio sensitivity low → high
248–255No function (shutter on)
159000–255Electronic frost 0 % – 100 %
Aurona FX Strobe IP6507 · Cleaning & Maintenance

Chapter 07

07Cleaning & Maintenance

No User-Serviceable Parts InsideRepairs only by qualified service personnel. Spare parts must be of the original type.
Aurona FX Strobe IP65— · CE Compliance Notice

Appendix

—CE Compliance Notice

The manufacturer declares under its sole responsibility that the Aurona FX Strobe IP65 complies with the relevant EU harmonization legislation.

EU Declaration of Conformity

A signed EU Declaration of Conformity exists for this product. It is not part of this manual and can be requested from us at any time — by email to verkauf@lexvision.de or by phone on +49 (0) 651 14567727, stating the product designation.